BORIKA-FASTEN Mounting kit for installation of fish finder with 7″ — 9″ screen and transducer along the side

BORIKA-FASTEN Mounting kit for installation of fish finder with 7″ — 9″ screen and transducer along the side 

The kit has been designed for installation of a fish finder monitor and a transducer on PVC boats. 

Product description:

• This set offers a complete solution for mounting a fish finder and a transducer on the side of an inflatable boat. The design comprises a plate for a small fish finder monitor (from 7″ to 9″) and an arm mount, suitable for most popular transducers of Lowrance, Raymarine, Garmin, Humminbird and other brands.
• The transducer mount is equipped with the adapter, which allows the structure to be fixed into any BORIKA FASTen® system. After use, the entire set can easily be removed for transportation without having to dismantle the equipment.
• The user can adjust the system to the width of the boat side, moving the clamp, which connects the plate and the arm.
• On the back side of the plate, there are marked thickened mounting points that match the standard mounting holes on the popular models of equipment.
• The assembly is designed in a way that allows the plate along with the installed equipment to be fully rotated around the axis of the adapter, which comes in hand during fishing, when you need to quickly change the position of the screen to avoid sun glare.
• The wall of the plate is 3 mm thick, it is made of fiberglass-reinforced polyamide, which ensures its reliability.
• The transducer holder has a two-stage telescopic design, the maximum distance between the transducer and the place of its installation on the boat is about 50 cm and the minimum distance is about 30 cm.
• The joint between the tubes is fitted with a locking system that automatically activates when the holder is unfolded. To fold it down — just press the button on the tube joint.
• The accessory is equipped with the covering fastening system that is suitable for most popular transducers. Two swivel brackets and the set of radius washers allow the coverage to be adjusted, and additional rigid “fins” of this system help to protect the transducer from mechanical damage.

Materials:

fiberglass-reinforced polyamide, anodized aluminium, polyurethane, A2 (AISI 304) stainless steel, brass.

In the package:

an Ft460 system.