MW-SC8E — Electronic Smart Charger

Smart electronic charger suitable for 12V and 24V lead-acid batteries (wet, gel, AGM) with selectable charging currents and advanced battery maintenance functions.

Key Features

• Input voltage: 220–240V (50Hz), max current 0.75A
• Output voltage: 12V max 14.7V, 24V max 29.4V
• Selectable output current: 12V – 1A / 4A / 8A, 24V – 1A / 4A
• Rated power: 96 W
• Efficiency: ~80%
• LCD display and microprocessor-controlled interface
• Battery capacity supported: 12V: 1.2–240Ah, 24V: 1.2–120Ah
• Protections: Overvoltage, short-circuit
• Battery reconditioning and desulfation modes
• Compact dimensions: 218 × 89 × 49 mm, Weight: 0.644 kg (net)

Applications

Suitable for cars, motorcycles, mopeds, quads, boats, lawn mowers, snow and water scooters, and other lead-acid battery-powered vehicles or devices.

Charging Stages

1. Initialization – Checks battery condition; enters Recovery Mode if deeply discharged.
2. Gentle charge – Slowly warms up the battery to avoid sudden bulk charge.
3. Constant current charge (stages 3–6) – Returns ~85% battery capacity.
4. Constant voltage charge – Gradually charges battery to 95%.
5. Float charge – Finalizes charging to full capacity.
6. Analysis – Evaluates battery capacity; may initiate Desulfation Mode.
7. Maintenance – Monitors battery and restarts charging if voltage drops below threshold.

Special Modes

• Recovery Mode – Restores deeply discharged or sulfated batteries with pulsed current.
• Desulfation Mode – Recovers capacity from sulfated batteries using high-voltage pulses.

Operating Environment

• Working temperature: -5°C to +40°C
• Working humidity: 20–90% RH (non-condensing)
• Storage temperature: -10°C to +60°C, humidity 10–95% RH

Safety & Compliance

• Safety: EN 60335-2-29:2004 + A2:2010; EN 60335-1:2012 + A11:2014
• EMC: EN 55014-1, EN 61000-3-3, EN 55014-2, EN 61000-3-2